- Vancouver: 1 (800) 605-4822
- Surrey: 1 (800) 796-8010
- Victoria: 1 (833) 846-2208
- Calgary: 1 (800) 605-4847
- Edmonton: 1 (800) 580-1089
100% Canadian Owned Company
Ladders and Platforms6 products
Dollies and Hand Trucks4 sub-categories
Warehouse Stock Carts and Trucks4 sub-categories
Pallet Racking29 products
Industrial Shelving32 products
Modular Drawer Systems11 products
Storage Bins and Containers5 sub-categories
Storage Lockers and Cabinets5 sub-categories
Industrial Workstations3 sub-categories
Warehouse Security Enclosures5 products
Modular Mezzanine Systems10 products
Pallet Jacks and Lifting Equipment15 products
Warehouse Loading Dock Equipment13 products
Industrial Floor Mats5 products
Made In Canada183 products
Clearance31 productsBlog Archives
Push Back Racking vs Drive-In Racking
When warehouse managers across Western Canada start asking about high-density storage, the conversation usually lands on two systems: push back racking vs drive-in racking. Both are LIFO configurations that eliminate excess aisles and pack more product into your footprint. But they perform very differently in practice, and choosing the wrong one creates operational drag that…
Read moreSelecting Industrial Shelving for High-Humidity Environments
Moisture is one of the most damaging variables in any storage environment, and it doesn’t announce itself until the corrosion is already visible. At Commander Warehouse, we’ve helped Western Canadian operations get this specification right for over 50 years, across food processing facilities, cold storage warehouses, coastal distribution centres, and industrial plants where condensation is…
Read moreHow to Configure Cantilever Racking for Pipe and Lumber
At Commander Warehouse, we work with operations that store long, unwieldy materials: pipe strings, dimensional lumber, steel bar, engineered joists. The configuration decisions made at the rack design stage determine whether that storage works or becomes a daily frustration. Knowing how to configure cantilever racking for pipe and lumber isn’t just a matter of fitting product into a bay; it’s about matching arm…
Read moreWhat Makes a Warehouse Mezzanine Load-Bearing Safe
At Commander Warehouse, we’ve seen mezzanine systems built to last decades and others that were a liability from day one. The difference rarely comes down to budget. It comes down to understanding what load-bearing safety actually requires: structural design, engineering certification, and how the space is managed once it’s in service. If you’re evaluating a new mezzanine installation or questioning the integrity of an existing…
Read moreHow Mobile Shelving Compares to Static Shelving Systems
When operations managers run out of floor space, the instinct is often to look at a bigger facility. At Commander Warehouse, we’ve spent over 50 years helping Western Canadian operations solve that problem before it gets that far. Understanding how mobile shelving compares to static shelving systems is one of the most practical conversations we have with clients, and…
Read moreUnderstanding Load Beam Capacity in Pallet Racking
At Commander Warehouse, we’ve spent over 50 years watching operations make the same costly mistake: choosing pallet racking based on upright capacity alone while treating load beam capacity as an afterthought. Understanding load beam capacity is the foundation of a safe, code-compliant storage system. Get it wrong and you’re looking at damaged product, regulatory exposure, or worse. What Load Beam Capacity Actually Means…
Read moreCantilever vs. Selective Pallet Racking
At Commander Warehouse, we field this question regularly from operations managers and procurement teams across Western Canada: cantilever or selective pallet racking, which one belongs in your facility? The answer depends entirely on what you’re storing and how your team needs to access it. Understanding the structural logic behind each system makes the decision straightforward. How Each…
Read moreSigns Your Current Warehouse Layout is Costing You Productivity
At Commander Warehouse, we’ve seen the same pattern repeat itself more times than we can count: a manager under pressure blames the team, or demands more overtime, when the real problem is staring everyone in the face from the floor plan up. If your operation feels harder than it should be, the signs your current warehouse layout…
Read moreStatic vs Dynamic Storage Systems
At Commander Warehouse, we’ve spent over 50 years helping Western Canadian operations get more out of their storage footprint. One of the most consistent questions we field is whether a facility should be running static or dynamic storage. In most cases, the honest answer is that it depends on your SKU profile, your throughput demands, and what you’re willing…
Read moreUnderstanding Weight Distribution for Multi-Tier Shelving Systems
At Commander Warehouse, we know that understanding weight distribution for multi-tier shelving systems means the difference between a storage system that holds up under real operating conditions and one that creates expensive problems down the line. Whether you’re configuring a new warehouse or retrofitting existing racking, getting load management right from the start determines long-term…
Read moreHow to Organize a High-Volume Picking Operation Without Adding Floor Space
When throughput climbs and order volumes spike, the instinct is to look for a bigger building. At Commander Warehouse, we’ve seen enough Western Canadian distribution and industrial operations to know that expanding floor space rarely solves the underlying problem: inefficient use of the space you already have. Organizing a high-volume picking operation without adding floor…
Read moreWhy Aisle Width Matters More Than Most Warehouse Managers Think
At Commander Warehouse, we’ve seen facilities locked into inefficient layouts long after their equipment mix has changed, and aisle width is almost always part of the problem. The wrong clearances don’t just slow your operation down; they force every other decision around them. Racking configurations, forklift selection, throughput capacity: all of it flows from…
Read moreUnderstanding Seismic Requirements for Warehouse Racking
Seismic design is a baseline requirement that shapes how racking systems are specified, installed, and maintained. At Commander Warehouse, understanding seismic requirements for warehouse racking is part of how we approach every project in Western Canada, where seismic activity is a documented engineering consideration, not a theoretical one. Getting this right from the start protects…
Read moreHow to Choose Between a Hand Truck and a Platform Truck
At Commander Warehouse, we are often asked by operations managers outfitting facilities across Western Canada whether they should use a hand truck or a platform truck. The decision comes down to three things: what you’re moving, where you’re moving it, and how your operators will interact with the load. Get those three right, and…
Read moreWhat to Look for When Buying Used Pallet Racking
Buying used pallet racking is one of the more practical ways to expand storage capacity without the lead times and cost of new systems. At Commander Warehouse, we’ve been helping operations teams across Western Canada choose the right pallet racking systems for over 50 years, and the same evaluation criteria come up every time. Knowing…
Read more